Metal-Tack
Home |
Fastener
Specs
These
rugged, portable, lightweight air tools are designed for simple
application of Metal-Tack or Gripnail fasteners. Air Hammer
number 221 utilises a series of magnetic drivers, which are
available for both Metal-Tacks and Gripnails.
Flexibility and ease of operation make these air hammers ideal
for field use, and for reaching hard to get at application surfaces.
A readily accessed air regulator is standard on both models.
Safety
features include interlock to absorb the impact if the hammer
is accidentally fired. The hammer will not impact unless depressed
against a solid base.
Removable
magnetic driver holds the fastener firmly in place while the
operator depresses the driving head against the application
surface. Then, with a single controlled force impact, the fastener
is driven into the base metal forming a permanent mechanical
attachment.
Magnetic
Drivers
Driver
tips are magnetised for holding Metal-Tack and Gripnail fasteners.
Drivers for all Gripnail fasteners have an exposed length of
2-1/2" and a head diameter of 3/4". Metal-Tack drivers
have an exposed length of 1-3/4" and a shaft diameter of
1/2".
Custom
drivers of varying lengths for special applications are available.
These drivers are for use with Air Hammer No. 22
Air
Hammer
|
Part
No.
|
Description
|
Driver
Type Used
|
|
221
|
Standard
Air Hammer (Includes
Air Regulator)
|
Magnetic
|
Magnetic Drivers
(For use with Air Hammers No 221)
|
Part
No.
|
Description
|
Designed
for Fasteners Series
|
|
260
|
For
flat head fasteners with 5/32" diam. head, has recessed
driving surface.
|
51
|
|
226
|
Universal
Metal Tack driver, flat surfaced driving head.
|
All
Metal Tacks
|
|
227
|
For
3/16" chamfered head fastener, has recessed driving
surface with taper.
|
3161
only
|
|
228
|
For
flat head fasteners with 3/16" diam., head, has recessed
driving surface.
|
31
and 33
|
|
229
|
For
flat head fasteners with 1/4" diam., head, has recessed
driving surface.
|
41
and 43
|
|
230
|
For
all Gripnail Fasteners.
|
All
Gripnails
|
